MachineMaker: Setting up a Five-Axis Milling Machine

Name: MachineMaker: Setting up a Five-Axis Milling Machine
Availability: InStock
Author: Gerry Grainger

Let's build a 5 axis Milling Machine - with MachineMaker, it's easy!

1 lesson18minTier 314 languages

About course

Five Axis Machines - they're not so intimidating when you are working with ENCY and MachineMaker! In this slightly extended single-video course, we'll go through building and setting up a fully integrated 5-axis Milling Machine from scratch (well, CAD files).

Author

Files

No files available

You’re good to go—no downloads needed.

Gerry Grainger

Training content producer

Languages

العربية•Deutsch•English•Español•Français•עברית•हिन्दी•Italiano•日本語•한국어•Nederlands•Polski•Português•中文

Lessons

1 lessons to go

1Building and Rigging a Haas UMC 350HD from CAD filesSet up a 5-axis milling machine using Haas models in MachineMaker, focusing on importing STEP files and configuring kinematics. Define the axes, adjust travel ranges, and ensure correct orientations for optimal machine operation. Save and export the machine schema for future use while maintaining best practices for geometry simplification.Video lesson

Lessons

1 lessons to go

1Building and Rigging a Haas UMC 350HD from CAD filesSet up a 5-axis milling machine using Haas models in MachineMaker, focusing on importing STEP files and configuring kinematics. Define the axes, adjust travel ranges, and ensure correct orientations for optimal machine operation. Save and export the machine schema for future use while maintaining best practices for geometry simplification.Video lesson

Course discussion

Loading discussion…